Removing The Lcd Assembly; Removing The Lcd Panel - Packard Bell EasyNote S Disassembly Manual

To remove the microphone, first remove the main board (see up to step 6 in
then perform the following steps:
1. Push out the microphone from the top cover using a small flat-bladed screwdriver or tweezers.
2. Carefully bend the metal clips open to remove the cable from the top cover.
3. Remove the microphone.

Removing the LCD Assembly

To remove the LCD assembly, first remove the heat shield (see
the following steps:
1. Disconnect the LCD cable from the main board.
2. Remove the 2 screws on the back of the system.
3. Remove the 2 screws in the bottom base, directly under the screws you removed on the back.
4. Carefully lift out the entire LCD panel.

Removing the LCD Panel

To remove the LCD panel, first remove the LCD assembly (see
Fig. 25 Metal clips securing the top cover cable.
Fig. 26 LCD cable connection on the main board.
Packard Bell EasyNote S Disassembly Manual
Removing the Main
Removing the Heat Shield), then perform
Removing the LCD Assembly), then
16
Board),