Removing The Lcd Panel Assembly - Packard Bell EasyNote SW Series Disassembly Manual

4. Flip keyboards towards you.
5. Disconnect the keyboard flat cable.
6. Disconnect the touchpad flat cable.

Removing the LCD Panel Assembly

Follow the steps below to remove the LCD panel:
1. Disconnect the two LCD connectors.
2. Release the wireless antenna cable (see Fig. 4).
3. Disconnect the wireless antenna cable.
4. Remove the two hinge covers.
5. Remove the four screws (2x left, 2x right) from the hinges.
6. Take away the LCD assembly.
Fig. 7
Removing the keyboard screws.
Fig. 8
Removing the keyboard flat cable.
Fig. 9
Disconnecting touchpad flat cable
Fig. 10
The hinge covers.
8