Removing The Cpu - Packard Bell EasyNote S Disassembly Manual

2. Push aside the clips for the mini-PCI card.
3. Take out the mini-PCI card.

Removing the CPU

To remove the CPU, first remove the heat shield (see
following steps:
1. Remove the CPU-fan (marked E in Fig. 10) by removing the 2 screws and disconnecting the
power cable from the main board.
2. Remove the CPU heat sink: Loosen the 3 screws in indicated order as marked on the heat
sink (1, 2, 3 on Fig. 13).
Fig. 11 The 2 antenna connectors:
Fig. 12 CPU heat sink & VGA heat sink.
Packard Bell EasyNote S Disassembly Manual
and
MAIN AUX
Removing the Heat Shield), then perform the
.
9