Removing The Wlan Mini-Pci Card - Packard Bell EasyNote S Disassembly Manual

Fig. 9 Screws marked A on the picture are marked 5 on the metal;
2. Lift out the heat shield; it should look like this:
Fig. 10 A = WLAN mini-PCI card and 2nd SO-DIMM slot; B = CPU;
C = keyboard connector; D = glide pad connector; E = CPU fan.

Removing the WLAN Mini-PCI Card

To remove the WLAN mini-PCI card, first remove the heat shield (see
perform the following steps:
1. Disconnect the 2 antenna connectors (
screw marked B on the picture is marked 15 on the metal.
Packard Bell EasyNote S Disassembly Manual
Removing the Heat
and )
MAIN AUX
8
Shield), then