Removing The Glide Pad; Removing The Microphone - Packard Bell EasyNote S Disassembly Manual

3. Take out the speakers.
Note
The two speakers are one part, so they cannot be exchanged separately.

Removing the Glide Pad

To remove the glide pad, first remove the main board (see up to step 6 in
then perform the following steps:
1. The glide pad is mounted on the top cover and consists of two parts: The glide pad surface
and the buttons.
2. For the button panel: Remove the 2 screws and disconnect the flat cable from the glide pad.
3. Lift the button panel and slide it backwards.
4. Lift the panel away and disconnect the flat cables.
5. For the glide pad surface: Remove the flat cable coming from the button panel.
6. Push out the glide pad, which has been glued to the top cover.

Removing the Microphone

Fig. 23 Metal clip securing the speaker cable.
Fig. 24 Removing the glide pad screws and flat cable.
Packard Bell EasyNote S Disassembly Manual
Removing the Main Board),
15