Lcd Assembly - Packard Bell EasyNote ST Disassembly Manual

1313131313
6. Release the white clip securing the button board flat cable and disconnect the cable.
7. Remove the top cover.

LCD Assembly

To disassemble the LCD assembly, first disconnect the WiFi antenna cables from the wireless LAN
adapter (see steps 1 to 3 in
Cover on page 11), and then perform the following steps:
1. Disconnect the three LCD cables from the headers on the main board.
2. Clear the WiFi antenna cable.
3. Open the LCD into an angle of approximately 90 degree.
Fig. 20 Disconnecting button board flat cable.
Wireless LAN Adapter
Fig. 21 Location LCD cables.
Packard Bell EasyNote ST Disassembly Manual
on page 6), remove the top cover (see
13
Top