Table of Contents
Advertisement
WD ARRAY MANAGEMENT SETUP
USER MANUAL
Manual Rebuild
After you replace a failed disk drive, the replacement drive must be rebuilt to restore the array.
To initiate an array Rebuild manually:
1. In Tree View, select the Array View
iconof the array you want to rebuild.
2. In Information View, click on the Start button inside the Rebuild Wizard box.
3. In the Rebuild Wizard, select the drive to be rebuilt (the replacement drive) and click
Next.
To confirm the rebuild choice, click Finish.
CHAPTER 5: RAID MONITORING AND MAINTENANCE WITH AMS - 52
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Western Digital Array Management Setup
Related Products for Western Digital Array Management Setup
- Western Digital ArmorLock Encrypted NVMe
- Western Digital AC21200 - Caviar 1.28 GB Hard Drive
- Western Digital AC22500 - Caviar 2.5 GB Hard Drive
- Western Digital AC2850 - Caviar 850 MB Hard Drive
- Western Digital AC310100 - Caviar 10.1 GB Hard Drive
- Western Digital AC2540
- Western Digital AC32100 - Caviar 2.1 GB Hard Drive
- Western Digital AC33100 - Caviar 3.2 GB Hard Drive
- Western Digital AC34000 - Caviar 4 GB Hard Drive
- Western Digital AC35100 - Caviar 5.1 GB Hard Drive
- Western Digital AC38400 - Caviar 8.4 GB Hard Drive
- Western Digital AC418000 - Expert 18 GB Hard Drive
- Western Digital AC28400 - Caviar 8.4 GB Hard Drive
- Western Digital AC11200
- Western Digital AC21600
- Western Digital AC31600
Need help?
Do you have a question about the Array Management Setup and is the answer not in the manual?