Create An Array - Western Digital Array Management Setup User Manual

The Administrator can assign more or fewer rights to other Users but cannot change their
passwords.
3. Type a User name and Password in their respective fields.
Check all the appropriate boxes to set access rights. Click the Submit button when you are
done.
The new user's name appears on Tree View.

Create an Array

The available RAID selection depends on the number of hard drives available.
The table below lists the RAID levels available with WD SATA RAID Controller and the
number of drives required.
See Appendix A: RAID Concepts for a more detailed description.
RAID Level
0
1
1. In Tree View, click the + to the left of the Controller
Look under the Disk View
have this icon.
2. Right-click on the Array View
Create Array icon appears.
Name
Striping
Mirroring
Table 2. RAID levels available on WD SATA RAID Controller
icon to see the unassigned disk drives. Unassigned drives
icon and select New Array from the popup menu. A
WD ARRAY MANAGEMENT SETUP
Minimum drives Maximum drives
1
2
icon to see the Disk View icon.
CHAPTER 3: INITIAL SETUP - 16
USER MANUAL
4
2