Trane Tracer ZN517 Installation And Operation Manual page 95

For packaged units
Place the jumper on
both pins at J1.
CNT-SVX12C-EN
Figure 28. Location of J1 on Tracer ZN517 circuit board
J1 (location of
jumper for Rc,
Rh terminals)
Figure 29. Coupling and uncoupling terminals Rc and Rh for 24 Vac
wiring of the HVAC unit
J1
Input/output terminal wiring
For split systems
Remove the jumper from
one of the pins at J1.
(Leave it on one of the pins
for possible future use.)
J1
83