Mounting Recommendations - Trane Tracer ZN521 Installation And Operation Manual

Chapter 3 Mounting the controller
12

Mounting recommendations

Mounting recommendations are as follows:
CAUTION
Mount the Tracer ZN521 zone controller with the cover on to avoid the
possibility of damaging the circuit board during installation.
Mount the controller in any position, other than with the front of the
•
cover facing downward.
Mount using the two
•
(see Figure 4). Mounting fasteners are not included.
Attach the controller securely so it can withstand vibrations of associ-
•
ated HVAC equipment.
When the controller is mounted in a small enclosed compartment,
•
complete all wiring connections before securing the controller in the
compartment.
Figure 4. Mounting the Tracer ZN521 zone controller
3
/ in. (4.8 mm) radius mounting holes provided
16
CNT-SVX07C-EN