Disabling/Enabling Security - Trane AdaptiView Operation Manual

Disabling/Enabling Security

The Tracer AdaptiView display gives you the ability to disable or enable the security feature that
allows a user to log in and log out.
To disable security, you must be logged in:
1. From the Settings screen, touch the Security button. The Security screen appears
2. Touch the Disable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with only the Security button visible. The Log in/Log
Figure 33. Security screen
To enable security:
1. From the Settings screen, touch the Security button. The Security screen appears
2. Touch the Enable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with a Log out button, in addition to the Security
CTV-SVU02A-EN
Note: If you are logged out, the Log in screen appears.
out button is gone.
button.
Security Settings
(Figure 33).
(Figure 33).
53