Security Settings
If security if enabled, the Tracer AdaptiView display requires that you log in with a four-digit security
PIN to make setting changes that are protected by security. This feature prevents unauthorized
personnel from doing so. There are two levels of security, each allowing specific changes to be
made.
You can view all data without logging in. The log-in screen appears only when you try to change
a setting that is protected by security, or when you touch the Log in button from the Settings screen.
Viewing the Settings Screen
Touch the Settings button in the main menu area (see
screen. Security Settings identifies a column on the right side of the screen that contains two
buttons (see the outlined column in
•
•
Figure 32. Equipment Settings screen with the Display Settings column highlighted
52
Security
Log in (Log out)
Note: If security is disabled,the Log in/Log out button is not visible. See
p.
53.
"Main Menu Area, " p.
Figure
32):
13) to view the Settings
"Disabling/Enabling Security,"
CTV-SVU02A-EN