Trane AdaptiView Operation Manual page 40

Equipment Settings
4. Touch the button the appropriate source button on the Setpoint Source screen.
5. Touch Save to complete the change.
Changing the setpoint source from an arbitrated setpoint screen
1. Touch the Settings button in the main menu area
2. From the Settings screen, touch the Chiller Settings button. The Chiller Settings screen appears.
3. From the Chiller Settings screen, touch an arbitrated setpoint. The setpoint screen for that
4. On the arbitrated setpoint screen, touch the Setpoint Source button. The Setpoint Source
5. Touch the button the appropriate source button on the Setpoint Source screen.
6. Touch Save to complete the change.
Figure 23. Changing the setpoint source from an arbitrated setpoint screen
40
Note: The change applies to all arbitrated setpoints.
specific arbitrated setpoint appears (see
Screen appears (Figure
Note: The change applies to all arbitrated setpoints.
Figure 23
22).
(Figure 1, p. 7). The Settings screen appears.
for an example).
CTV-SVU02A-EN