Restarting The Chiller - Trane AdaptiView Operation Manual

2. Touch the Yes button. The Shutting Down Chiller screen appears
Figure 5. Shutting Down Chiller screen

Restarting the Chiller

Touch the Auto button to initiate the chiller restart process. You can observe the mode change to
Auto. The chiller will wait until cooling is needed before starting the compressor.
When the chiller is running normally, it automatically starts and stops as needed to reach its
setpoints.
CTV-SVU02A-EN
• To stop the chiller normally, no further action is required. You can observe the submodes
change and the timers count down.
• To stop the chiller immediately, touch the Immediate Shutdown button.
• To cancel shutdown, touch the Cancel Shutdown button.
Stopping/Restarting Chiller Operation
(Figure 5).
15