Trane AdaptiView Operation Manual page 36

Equipment Settings
Figure 21. Example equipment settings screen with keypad for changing setting
3. Touch Save to complete the change. The current value is updated in the upper left side of the
36
• For screens with numerical keypads
the current value. The new value appears above the keypad.
Keypad features:
• When you enter a new number, the value in the New value field is deleted and replaced with the new entry.
• The backspace (arrow) key deletes the characters you previously entered.
• If the keypad is used to enter a setpoint that is out of range, an error dialog will appear when you touch the Save
button.
• Keypads that allow negative numbers have positive and negative number (+/-) keys.
screen, demonstrating that the change has been communicated to the Tracer UC800 controller.
The screen you were previously viewing appears.
Note: Manual Control Settings screens have Apply buttons in addition to Save buttons. See an
example in "Manual Control Settings, " p.
Save, except that you remain at the current screen after the change is communicated to
the Tracer UC800 controller
(Figure 21), touch the appropriate numbers to change
42. Touching Apply is the same as touching
(Figure 24, p. 43).
CTV-SVU02A-EN