Mac Clone; Lan - TP-Link TL-MR3020 User Manual

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.
4.5.4

MAC Clone

Choose menu "Network→MAC Clone", you can configure the MAC address of the WAN on
the screen below, Figure 4-20:
Some ISPs re quire that you register the MAC Address of your adapter. Changes are rarely
needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port. If

your ISP requires you to register the MAC address, please enter the correct
into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is

managing the Router. If the MAC address is required, you can click the Clone
Address To button and this MAC address will fill in the WAN MAC Address field.
Click R estore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Save button to save your settings.
Click the

Note:
your LAN can use the MAC Address Clone function.
Only the PC on
4.5.5

LAN

Choose me nu "Network→LAN", you can configure the IP parameters of the LAN on the screen
as below.
TL-MR3020
Figure 4-20 MAC Address Clone
-51-
Portable 3G/4G Wireless N Router
MAC address
MAC