Dhcp; Dhcp Settings - TP-Link TL-MR3020 User Manual

5.7 DHCP

Figure 5-26 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 5-26 ): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
5.7.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", and then you can configure the DHCP Server on the
page (shown in Figure 5-27).The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that
are connected to the Router on the LAN.
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer
manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when

assigning IP addresses. 192.168.0.100 is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning

IP addresses. 192.168.0.199 is the default end address.
TL-MR3020
Figure 5-27 DHCP Settings
-140-
Portable 3G/4G Wireless N Router