TP-Link TL-MR3020 User Manual page 227

4. Click the Save button to save this entry.
To add additional entries, repeat steps 1-4.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disable All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-
able to access the device, while all other wireless stations cannot access the device, you should
configure the Wireless MAC Address Filtering list by following these steps:
1. Click the Enable button to enable this function.
2. Select the radio button: Deny the stations not specified by any e
list to access for Filtering Rules.
3. Delete all or disable all entries if there are an
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC
Address field, enter Wireless Station A in the Description field and select Enabled in the
Status pull-down list. Click the Save button.
The filtering rules th at configured should be similar to the following list:

Note:
If you enable the function and select the "Deny the stations not specified by any enabled
entries in the list to access" for Filtering Rules, and there are not any enabled entries in the list
thus, no wireless station
TL-MR3020
s can access the device.
-216-
Portable 3G/4G Wireless N Router
modify. If you want to delete the entry, click the
y entries already.
00- 07-BE is
nabled entries in the
,