Address Reservation - TP-Link TL-MR3020 User Manual

 MAC Address - Here displays the MAC address of the DHCP client.
Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client.

 Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP
client will request to renew the lease automatically.
You cannot change any of the values on this page. To
attached devices, click on the Refresh button.
6.7.3

Address Reservation

Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a
PC on the LAN, so the PC will always obtain the same IP address each time when it accesses
the AP. Reserved IP addresses should be assigned to servers that require permanent IP
settings. The screen below is used for address reservation (shown in Figure 6-22).
 MAC Address - Here displays the MAC address of the PC for which you want to reserve an
IP address.
 Reserved IP Address - Here displays the IP address that the AP is reserved.
 Status - Here shows whether the entry is enabled or not
Modify - To modify or delete

To Reserve IP addresses:
1. Click the Add New... button to add a new Address Reservation entry.
2. Enter the MAC address in XX-XX-XX-XX-XX-XX format and IP address in dotted-decimal
notation of the computer you wish to add.
3. Click Save when finished.
To modify A Reserved IP address:
1. Select the reserved address entry to your needs and click Modify. If you wish to delete the
entry, click Delete.
2. Click Save to keep your cha
To delete all Reserved IP addresses:
1. Click Clear All.
TL-MR3020
Figure 6-22 Address Reservation
an existing entry.
nges.
-221-
Portable 3G/4G Wireless N Router
update this page and to show the current