Forwarding - TP-Link TL-MR3020 User Manual

Status - The status of this entry either Enabled or Disabled.

To Reserve IP addresses:
1. Click the Add New ... button. (Pop-up Figure 4-36)
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in
dotted-decimal notation of the computer you wish to add.
3. Click the Save button when finished.
Figure 4-36 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/ Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return the
previous page.

4.8 Forwarding

Figure 4-37 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-37): Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
TL-MR3020 Portable 3G/4G Wireless N Router
-65-