Factory Defaults; Backup & Restore - TP-Link TL-MR3020 User Manual


Note:
1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Router rather than the
configuration, you can try to upgrade the firmware.
2) When you upgrade the Router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3) Do not turn off the Router or press the Reset button while
Loss of power during the upgrade could damage the Router.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the Router restarts
upgrade is complete.

5.16.4 Factory Defaults

Choose menu "System Tools
configurations of the Router to factory defaults on the following scre
Click the Restore button to reset all configuration settings to their default values.

The default User Name: admin

The default Password: admin

The default IP Address: 192.168.0.254

The default Subnet Mask: 255.255.255.0

Note:
All changed settings will be lost when defaults are restored.
5.16.5 Backup & Restore
Choose menu "System Tools → Backup & Restore", and then you
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 5-84.
TL-MR3020
→ Factory Defaults", and then and you can restore the
Figure 5-83 Restore Factory Default
-182-
Portable 3G/4G Wireless N Router
the firmware is being upgraded.
automatically when the
en.
can save the current