Internet Access - Draytek Vigor2920 Series User Manual

4 . 1 . 3 I n t e r n e t A c c
4 . 1 . 3 I n t e r n e t A c c
For the router supports multi-WAN function, the users can set different WAN settings (for
WAN1/WAN2/WAN3) for Internet Access. Due to different Physical Mode for WAN
interfaces, the Access Mode for these connections also varies. Refer to the following figures
Each item is explained as follows:
Item
Index
Display Name
Physical Mode
Access Mode
WANs. However, ignore this setting if you want to backup a
single WAN.
When any WAN disconnect – Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect – Such backup WAN will be
activated only when all master WAN interfaces disconnect.
e s s
e s s
Description
Display the WAN interface.
It shows the name of the WAN1/WAN2/WAN3 that entered
in general setup.
It shows the physical connection for WAN1(Ethernet)/WAN2
(Ethernet) /WAN3 (3G USB Modem) according to the real
network connection.
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
77
Vigor2920 Series User's Guide