Draytek Vigor2920 Series User Manual page 86

Details Page
D e t a i l s
D e t a i l s
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Available settings are explained as follows:
Item
PPPoE Client Mode
ISP Access Setup
Vigor2920 Series User's Guide
Details Page for accessing the page to configure the settings.
This button will open different web page according to the
access mode that you choose in WAN interface.
P a g e f o r P P P o E i n
P a g e f o r P P P o E i n
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application – Schedule web page and you can
W A N 1 / W A N 2
W A N 1 / W A N 2
78