DigiDesign 003 Family Setup Manual page 93

If you are using any DI inputs, press the
2
Mic/DI switch (located on the top panel of the
003, and on the front panel of the 003 Rack) for
the corresponding input so that it is in the DI
(lit) position.
Input 1-4 Gain control
Mic/DI and HPF switches for Inputs 1–4
Mic/DI switches (located on the top panel of 003, and
front panel of 003 Rack)
For line-level devices, the Input Gain Control
knob should be turned down all the way.
If you are using any of the Inputs 5–8, set ei-
3
ther a –10 dBV or +4 dBu operating level for the
corresponding input using the Operating Level
switch (located on the back panel). For informa-
tion on the appropriate operating level for your
input device, see the manufacturer's specifica-
tions.
003 and 003 Rack's four Analog Inputs
Operating Level switches
for Analog Inputs 5-8
Set your instrument's volume to its optimal
4
level. For example, the optimal level for most
keyboards is between 80% and 100% of maxi-
mum volume.
When Pro Tools is launched and the input is
5
routed to a Pro Tools track, if you are using the
DI Inputs you can adjust the input level with the
Input Gain Control knob.
To use a keyboard or mixer with 003 Rack+:
On the back of the 003 Rack+, plug your key-
1
board, mixer, or other audio source into any of
the Line/ DI inputs.
Stereo keyboard plugged into Line/DI inputs 1–2
Chapter 10: Making Studio Connections 83