DigiDesign 003 Family Setup Manual page 54

Mstr Faders (Master Faders) Switch
When enabled (flashing), the Master Faders
switch arranges all Master Fader tracks in the
current session on the right-hand side of the
control surface. Pressing this switch a second
time returns the control surface to the previous
view.
In Pan View, the Master Fader levels are dis-
played in the LCD.
Fader Flip Switch
When enabled (flashing), the Flip switch in-
vokes Flip mode. Flip mode transfers control as-
signments from the rotary encoders to the corre-
sponding channel faders, allowing you to use
the touch-sensitive faders to edit and automate
send and plug-in values. Additonally, in certain
views, the rotary encoders are available to con-
trol another parameter.
Flip mode is not available in Pan View.
See "Using Flip Mode" on page 108 for
more information.
44 003 Family Setup Guide
Default Switch
The Default switch is used in conjunction with a
Channel Select switch to reset a fader (or
fader-mapped plug-in parameter) to its default
setting. For example, you can reset a channel
volume fader to its default level of 0.0 dB.
See "Setting Track Controls to Defaults" on
page 107 for more information.
Input Switch
The Input switch toggles Auto Input and Input
Only Monitor mode for record-enabled tracks.
See the Pro Tools Reference Guide for more
information about Pro Tools input monitor-
ing modes.