Recalling Midi Map Presets - DigiDesign 003 Family Setup Manual

Recalling MIDI Map Presets

To recall a MIDI Map preset (A1–4 or B1–4) from
flash memory:
Press either the MIDI Map A switch or the
1
MIDI Map B switch.
Press MIDI Recall. The MIDI Recall switch LED
2
flashes.
MIDI Recall switch
The LCD display for the first two channel strips
show the number and name of the current MIDI
Map preset.
The LCD display for channels 6–8 show three
MIDI mode commands: Recall, Save, and Can-
cel. The commands are selected by pressing the
corresponding switches in the Channel View
section.
MIDI Recall display
ch 1 ch 2 ch 6
Preset# Name
num name
Recall
Scroll through the available presets using the
3
rotary encoder 1.
To select the displayed preset, select Recall by
4
pressing the Page Right switch.
To recall the selected preset from Flash mem-
5
ory, select Flash by pressing the Dynamics
switch.
ch 7 ch 8
Save Cancel
Do one of the following:
6
• To confirm and load the preset, select OK
by pressing the Master Bypass switch (Mas-
ter Bypass).
– or –
• To cancel without loading the preset, select
Cancel by pressing the ESC switch.
For information on editing preset MIDI
maps, see "Editing MIDI Map Presets" on
page 119.
For information on naming and saving pre-
sets, see "Naming MIDI Map Presets" on
page 121 and "Saving MIDI Map Presets"
on page 121.
To exit MIDI Recall mode:
Press the flashing MIDI Recall switch. 003 ex-
its MIDI Recall mode and the switch LED stops
flashing.
Chapter 12: Using MIDI Mode with 003 117