DigiDesign 003 Family Setup Manual page 16

Follow the on-screen instructions to proceed
4
with installation.
Click Continue each time you are prompted.
5
At the Installation Type page, do one of the
6
following:
• To install all Pro Tools application files and
free plug-in suites (and associated content),
leave the default Installation options se-
lected and click Continue.
– or –
• Select (or deselect) a custom configuration
of Installation options (see "Installation
Options" on page 7) and click Continue.
Click Install.
7
If prompted, enter your Administrator pass-
8
word and click OK to authenticate the installa-
tion.
Follow the remaining on-screen instructions.
9
When installation is complete, click Restart.
10
Before launching Pro Tools LE software, shut
11
down your computer and connect the 003 fam-
ily interface to your computer.
Plug the 003 family interface into a standard
12
AC outlet, using the AC power cable included
with the unit. AC power is required to operate
your 003 family interface.
Locate the FireWire cable that came with
13
your unit.
Be sure to note the orientation of the
FireWire cable connector when you insert it
in your 003 family interface. It is possible
to damage the FireWire port if you force the
connector in upside down.
6 003 Family Setup Guide
Plug one end of the FireWire cable into one
14
of the ports marked "1394" on the back panel of
your 003 family interface. Either port will work.
FireWire ports
003 family FireWire ports (back panel)
Do one of the following, depending on your
15
system configuration:
• Plug the other end of the FireWire cable
into an available FireWire port on your
computer.
– or –
• If your computer has only one FireWire
port, plug the other end of the FireWire ca-
ble into an available FireWire port on a
FireWire hard drive connected to your
computer.
Connecting your 003 family interface to
your computer through a FireWire hard drive
does may not provide the maximum track
count. To achieve the maximum track count,
install a Digidesign-qualified PCI/PCM-
CIA/ExpressCard to increase the number of
FireWire ports on your computer.
For information on supported PCI/PCM-
CIA/ExpressCard FireWire options, visit the
Digidesign website (www.digidesign.com).