Switch Test; Encoder Test; Fader Tests - DigiDesign 003 Family Setup Manual

Switch Test

Use this test to evaluate the performance of
switches.
To test switches:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select the Test menu by pressing the flashing
2
Insert switch.
The LCD shows the first page of Utility tests.
Select the Switch test display by pressing the
3
flashing Pan/Send switch.
Press any top panel switch to test it. The LCD
4
shows the name, region and number for each
switch as you test it.
To exit the test at anytime, press the Display
5
Mode switch.

Encoder Test

Use this test to evaulate the performance of the
rotary encoders or the Jog/Shuttle wheel.
To test the encoders:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select the Test menu by pressing the flashing
2
Insert switch.
The LCD shows the first page of Utility tests.
Enter the Encoder test by pressing the flashing
3
Page Left switch.
Rotate any encoder (or the Jog/Shuttle wheel)
4
to test it. Encoder value is displayed in the LCD
while testing.
To exit the test at anytime, press the Display
5
Mode switch.

Fader Tests

Utility mode provides tests for fader and group
performance. You can use these routines to trou-
bleshoot the mechanical elements of the faders.
Automated Fader Tests
These automated fader tests check fader perfor-
mance. You can use these routines to trouble-
shoot the mechanical elements of the faders.
To test fader resolution:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select the Test menu by pressing the flashing
2
Insert switch.
The LCD shows the first page of Utility tests.
Select the Fader menu by pressing the flashing
3
Page Right switch.
Select one of the basic automated fader tests:
4
Triang, Sine, or Step.
Do not touch the faders during a Fader test.
The faders will automatically move in a triangu-
lar, sine, or step pattern, as selected.
To exit the test at anytime, press any switch.
5
: 145