Viewing Firmware Version Data; Lcd Display Test; Led Tests - DigiDesign 003 Family Setup Manual

Exiting Utility Mode
To exit Utility mode:
If a test is running, press ESC or Display Mode
1
to exit the test.
Press the flashing Utility mode switch.
2
Viewing Firmware Version
Data
This Utility function lets you check the current
firmware version and other statistics useful
when upgrading, or when contacting technical
support.
To display firmware version data:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select Version by pressing the flashing EQ
2
switch.
The LCD shows version information about vari-
ous components of the unit.
To exit and return to the previous Utility
3
mode display, press the flashing Display Mode
switch.

LCD Display Test

Use this test to assess the performance of the
LCD.
To test the LCD:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select the Test menu by pressing the flashing
2
Insert switch.
144 003 Family Setup Guide
The LCD shows the first page of Utility tests.
Select the LCD test by pressing the flashing
3
Dynamics switch.
The 003 automatically scrolls all of its character
sets across the LCD display.
To stop scrolling and quickly tell if any area of
4
the display is damaged, press and hold any
switch except for the Display Mode switch.
Do one of the following:
5
• To return to the previous Utility page, press
the flashing Display Mode switch.
– or –
• To exit the test at anytime, press the flash-
ing ESC switch or Display Mode switch.

LED Tests

Use this test to display all LEDs simultaneously
or cycle through the LEDs.
To test LEDs:
Enter Utility mode. If the Utility switch is not
1
enabled (flashing), press it.
Select the Test menu by pressing the flashing
2
Insert switch.
The LCD shows the first page of Utility tests.
Select the LED menu by pressing the flashing
3
Insert switch.
Do one of the following
4
• To display all LEDs, press the flashing Dy-
namics switch.
– or –
• To cycle through all the LEDs, press the
flashing Insert switch.
To exit the test at anytime, press any switch.
5