Volvo XC90 Owner's Manual page 50

Hide thumbs Also See for XC90:
Table of Contents

Advertisement

Parking assistance
(option)
The system is always activat-
ed when the car is started.
Press the button to deacti-
vate/reactivate the parking
assistance system. See also page 127.
Deactivation of the
1
deadlocks
and detectors
Use this button when you wish
to switch off the deadlock
function (doors cannot be
opened from the inside when
locked). This button can also be used when
deactivating the alarm system's movement
2
and tilt detectors
. The LED illuminates when
these systems are shut down/deactivated.
Auxiliary lamps
(accessory)
Use this button to switch the
auxiliary lamps on with main
beam or to switch them off.
1
Certain markets
2
Option
Active Bi-Xenon Lights,
ABL (option)
The ABL headlamps' head-
lamp pattern follows the
movements of the steering
wheel during driving. The
function is activated automatically when the
car is started and can be deactivated/activat-
ed by pressing the button. The LED in the
button illuminates when the function is acti-
vated.
Shifting headlamp pattern for right/left-
hand traffic
Hold the button depressed for at least
5 seconds. The car must be stationary when
the headlamp pattern is shifted. The mes-
sage
DIPPED BEAM SETT. F. RIGHT
or
TRAFFIC
DIPPED BEAM SETT. F. LEFT
is shown in the display. For more
TRAFFIC
information and adapting headlamp pattern
for halogen or Bi-Xenon headlamps, see
page 146.
Electric socket, (standard)/
Cigarette lighter (option)
The electric socket can be
used for various 12 V acces-
sories, e.g. mobile phone or a
cooler box.
02 Instruments and controls
Switches in the centre console
The ignition key must be at least in position I
so that the socket can supply power.
The cigarette lighter is activated by pushing
in the button. Once the lighter has been heat-
ed, the button pops out again. Pull out the
lighter to use it. For safety reasons, always
keep the cover in place when the socket is
not in use. Maximum current tap 10 A.
WARNING
Always leave the plug in the socket when
the socket is not in use.
BLIS – Blind Spot Infor-
mation System (option)
Press the button to deactivate
or reactivate the function. See
page 129 for further informa-
tion.
02
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents