Volvo XC90 Owner's Manual page 198

Location of bulbs in front lamp
1
2
4 3
5
1. Dipped beam
2. Main beam
3. Direction indicator
4. Parking lamp
5. Side marker lamps
Dipped beam, halogen
– Undo the outer cover by turning it anti-
clockwise.
– Unplug the connector.
– Disconnect the spring clamp. First push to
the right so that the spring clamp discon-
nects, then out and down.
– Pull out the lamp.
– Fit the new bulb. It can only be fitted in
one position.
– Press the clamp spring upwards and a
little to the left so that it secures in its
catch.
– Press the connector back in place.
– Screw the cover back into place; the
marking HAUT should be at the top.
09 Maintenance and service
Main beam
Halogen and Bi-Xenon headlamps
– Undo the outer cover by pulling it straight
out and then unplug the connector.
– Disconnect the spring clamp. First push to
the right so that the spring disconnects
and then out and down.
– Pull out the lamp.
– Fit the new bulb. It can only be fitted in
one position.
– Press the clamp spring upwards and a
little to the left so that it secures in its
catch.
– Press the connector back in place and
refit the cover.
Replacing bulbs
09
197