Volvo XC90 Owner's Manual page 234

Privacy handset
A
If you wish to speak without disruptions, use
the privacy handset. Lift the handset by
pressing briefly on the top (A).
– Select the desired phone number using
the centre console keypad and lift the
handset to place the call. Adjust the vol-
ume with the dial on the side of the
handset.
The call is ended when you replace the hand-
set in its holder.
If you wish to switch to handsfree without
ending the call:
– Press on the steering wheel keypad
(or control panel menu buttons) and select
Handsfree.
– Press ENTER and replace the handset in
its cradle. If the handset is already re-
moved from its cradle when a call is
started, the ringing party will be audible in
the handsfree system.
– Press the MENU button, scroll to Handset
and press ENTER in order to transfer to
the handset.
Last dialled numbers
The phone automatically stores the last
phone numbers/names called.
– Press ENTER in the steering wheel or
control panel keypad.
– Use the menu buttons to scroll forward or
back through the last numbers dialled.
They are shown in the display.
– Press ENTER.
Speed dial
Storing speed dial numbers
A number stored in the phone book can be
linked to a speed dial button (1–9).
Proceed as follows:
– Select Phone book in the menu and
press ENTER.
– Scroll to Speed dial, (see page 238), and
press ENTER.
– Select which number is to be the speed
dial number. Press ENTER to confirm.
10 Infotainment system
Phone functions (option)
– Search for the desired name or phone
number in the phone book. Press ENTER
to select.
Using speed dial
– To make a call, press and hold the desired
speed dial button for about two seconds
or press the button briefly and then press
ENTER.
– Once you switch on the phone, wait a
moment before using speed dial.
NOTE
If you wish to use a speed dial number
Menu 3.3.1, (see page 240), must be acti-
vated.
Call waiting
If you hear two beeps in your speaker during
a phone call, someone else is calling. This
function can be selected or deselected in the
menu.
In this mode, you can choose to either take
the call or refuse it. If you do not wish to take
the call, press EXIT/CLEAR or do nothing.
If you do wish to take the call, press ENTER.
Your current call will be put in "park mode". If
you press EXIT/CLEAR, both calls will be si-
multaneously terminated.
10
233