Volvo XC90 Owner's Manual page 134

Towing eye
The towing eye is in the tool kit in the cargo
area. You must screw the towing eye into
place before towing. The socket and cover
for the towing eye are on the right-hand side
of each bumper.
Remove the cover as follows:
– Release the bottom edge of the cover (A)
with a coin.
– Screw in the towing eye (B) firmly
– Screw in firmly, right up to the flange (C).
You can use a wheel brace.
After use, unscrew the towing eye and refit
the cover.
The towing eye may only be used for towing
on roads, not for recovery after driving into a
ditch or the like. Professional help should be
called for recovery.
IMPORTANT
The towing eye cannot be fitted in the rear
bracket on cars with towbar. In which case,
secure the tow rope in the towbar. For this
reason, it is advisable to always store the
detachable towbar in the car.
06 Starting and driving
Towing and recovery
06
133