Volvo XC90 Owner's Manual page 201

09 Maintenance and service
Replacing bulbs
09
– Place the insert on a soft surface so as not
to scratch the glass.
– Turn the bulb holder anticlockwise and
pull it out.
– Turn the bulb anticlockwise to loosen it.
(Applies to direction indicators, reversing
lamps and brake lamps).
– Pull the bulb straight out. (Applies to posi-
tion lamps).
– Replace the bulb.
– Refit the bulb holder in the recess and turn
clockwise.
– Press back the extra length of cable.
– Refit the insert against the bolt holes.
Press the insert into place.
– Tighten the nuts.
– Refit the side panel and corner piece.
200
Rear fog lamp
– Insert a slotted screwdriver as indicated
by the arrow in the illustration.
– Prise out the lamp insert.
– Turn the bulb holder anticlockwise to loos-
en it.
– Turn the bulb anticlockwise and lift the
bulb out.
– Replace the bulb.
Number plate lighting
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screws with a screwdriver.
– Loosen the whole lamp housing carefully
and pull it out.
– Replace the bulb.
– Refit the entire lamp housing and screw it
into place.