Volvo XC90 Owner's Manual page 199

09 Maintenance and service
Replacing bulbs
09
Main beam
Active Bi-Xenon headlamps
– Switch off all lights and turn ignition key to
position 0.
– Remove the cover.
– Turn the bulb anticlockwise and pull it out.
– Undo the connector by pressing the catch
out and then pulling.
– Plug the connector into the bulb, a click is
heard.
– Refit the bulb, turn it in position.
– Refit the cover.
198
Side marker lamps and position/
parking lamps
The bulbs are housed in bayonet holders.
– Turn the bulb holder anticlockwise and
remove.
– Pull the bulb straight out.
– Fit the new bulb by carefully pressing it
into the recess.
– Fit the bulb holder back in place and turn
clockwise.
Direction indicators
The bulbs are housed in bayonet holders.
– Turn the bulb holder anticlockwise and
remove.
– Press in the bulb, turn anticlockwise and
remove.
– Fit the new bulb by pressing it into the
recess and then turning clockwise.