Viking 1600A Series Technical Practice page 4

E - 1 6 0 0 - 2 0
E - 1 6 0 0 - 2 0
Dimensions: Overall - 127mm x 127 x 57mm (5.0" x 5.0" x 2.25"), Plastic Electrical Box - 102mm x 102mm x 54mm (4.0" x 4.0" x 2.14")
Shipping Weight: 1 kg (2.12 lbs.)
Front Panel Material: 14 gauge brushed stainless steel
Connections: Standard E-1600-20A - RJ11, E-1600-20A-EWP - Gel-filled butt connectors
Optional Enhanced Weather Protection (EWP): The optional EWP products feature sealed trim pots, sealed DIP switches, hand sol-
Need More Information on EWP?
?
Call (715) 386-4345 and select 859.
Mounting with Plastic Rough-In Box (included): Flush into walls, mounts to side of wall stud Mounting with Optional VE-5x5:
Surface mount to walls, single gang boxes, double gang boxes, posts, or to a Viking VE-GNP Gooseneck pedestal (see options below).
Caution: When warm air comes in contact with cold surfaces, such as outside walls and conduits, it causes condensation. To prevent
condensation from accumulating inside the E-1600-20A always bring conduit into the bottom of the unit. If this is not possible, drill a 1/4"
diameter hole in the bottom of the black plastic box.
Front View of
Plastic Rough-In
Box (included)
Wire knock out
(2) Standard flat head dry wall
(sheet rock) screws (not included)
The black plastic rough-in box (part # 259576) may be
purchased separately (Example: Mounting boxes to
studs before the walls are finished for flush installa-
tion). Go to www.vikingelectronics.com and click on
"Spare Parts" to order these rough-in boxes.
* Note: Peel off paper liner and adhere gasket to the back of the faceplate, cen-
tering it over the four corner mounting holes.
Important: Be careful to position the modular jack inside the chassis as not to
damage the components on the circuit board. The E-1600-20A will NOT mount
to a standard double gang box.
E - 1 6 0 0 - 0 3
E - 1 6 0 0 - 0 3
Dimensions: 183mm x 149mm x 39mm (7.22" x 5.86" x 1.55")
Material: .074" (14 gauge) Brushed stainless steel panel and extra heavy duty button with LED
Shipping Weight: 1.36 kg (3 lbs.)
Connections: Standard E-1600-03B - RJ11, E-1600-03B-EWP - Gel-filled butt connectors
Mounting: Surface mount to walls, posts, single gang boxes, double gang boxes or 4" x 4" electrical
junction boxes or recess mount in elevator phone boxes.
Optional Enhanced Weather Protection (EWP): The optional EWP products feature sealed trim pots, sealed DIP switches, hand sol-
dered and silicon sealed connections, rubber boots and gaskets, urethane potted circuit boards and gel- filled butt connectors.
Note: For greater weather resistance, apply a bead of clear silicon caulking around the top edge and sides of the chassis
EMERGENCY
Grade 2
Braille Label
CONNECTED
Call Connected LED
Push To Call Button
VIKING
4.
A
A
( o p t i o n a l
( o p t i o n a l
dered and silicon sealed connections, rubber boots and gaskets, urethane potted circuit boards and gel-
filled butt connectors.
2.1"
4.0"
N C Y
R G E
E M E
N E
P H O
H E L
I N F O
L
C A L
T E D
N E C
C O N
B
B
( o p t i o n a l
( o p t i o n a l
Front View
5.36
PHONE
1.55
PUSH FOR
HELP
7.22
VIKING
©
CALL
MODEL E-1600-03B
©
8-32 x .5" set
screws provided
E W P a v a i l a b l
E W P a v a i l a b l
* Adhere gasket to front panel,
centering over mounting holes
5.0"
5.14"
P
Grade 2 Braille
Label
"Help" Push to
Call Button 2.25"
Call Connected
Red LED
"Info" Push to Call Button
(4) 6-32 X 3/4" stainless steel, flat
head, hexdrive, screws (included)
Condensation Drain Hole
E W P a v a i l a b l
E W P a v a i l a b l
Condensation
Drain Hole
Bottom View
e )
e )
3.25"
5.22"
3.81"
Condensation
Drain Hole
3/4" Knockout
for conduit
Front View of Optional
VE-5x5 (not included)
(4) 0.38" diameter
(4) 0.2 x 0.43 slots
for double gang box
(2) 0.2 x 0.43 slots
for single gang box
3.0" 3.3"
3/4"
Knockout
3.0"
Rear View of VE-5x5
(not included)
? Need More Information on the VE-5x5 or VE-GNP?
Call (715) 386-4345 and select 424.
e )
e )
?
Back View
1.69
1.70
3.40
6.78
0.795
1.70
0.80
2.605
3.40
5.00
10.50"
39.5"
41.41"
Side View of VE-GNP
(not included)
Need More Information on EWP?
Call (715) 386-4345 and select 859.
(4) .22 diameter
mounting holes
0.781
dia.
3.30
(4) .187 x .50
slots for double
gang box
(2) .187 x .50
slots for single
gang box