Viking E-1600A-TP-EWP Technical Practice
Ada emergency phones for talk-a-phone applications
Hide thumbs
Also See for E-1600A-TP-EWP:
- Technical practice (12 pages) ,
- Application note (1 page) ,
- Technical practice (12 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Technical Practice
TECHNICAL
TECHNICAL
E-1600A-TP-EWP
voice communication is possible during power failures. All phone numbers, location numbers, voice announcement
and programming parameters are stored in non-volatile memory. No batteries are required.
The E-1600A-TP-EWP and E-1600A-TP2-EWP are equipped for outdoor or harsh environments with Enhanced
Weather Protection, which features: potted circuit boards, sealed trim pots and dip switches, rubber gaskets and
boots, gel-filled butt connectors, and extended operating temperature: -15°F to 130°F, tested to -35°F.
P
P
• Enhanced Weather Protection (EWP)
• Meets ADA requirements for Emergency Phones:
- Can automatically light the "Call Connected" LED for the
hearing impaired
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 16 seconds of voice
memory
• Provides contact or switched 12V DC for controlling a strobe light
• Advanced call progress detection
• Handsfree operation
• Phone line powered emergency phone (LDB-3 requires power)
• Non-volatile memory (no batteries required)
• Touch Tone or pulse dialing
• Dials up to 5 emergency numbers
• E-1600A-TP2-EWP can also dial up to 3 non-emergency "Info"
numbers
• Cycles through backup emergency and non-emergency numbers
on busy or no-answer
• Hangs up on CPC, silence, busy signal, dial tone, time-out or
touch tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-15°F to 130°F)
• Central Station Monitoring capability (dials 2 numbers)
• Separate central station voice speed dial number
• Optional PB-100 Polling System available (see page 10)
• High visibility, vandal and weather resistant
E-1600A-TP2-EWP
h
o
n
e
.
.
.
7
1
5
.
3
8
6
.
8
h
o
n
e
.
.
.
7
1
5
.
3
8
6
.
8
P
r
a
c
t
P
r
a
c
For use with Talk-A-Phone tower, pedestal, surface, wall
and flush mount enclosures. Code Blue towers require
redrilling and tapping.
The E-1600A-TP-EWP or E-1600A-TP2-EWP will call up
to 5 programmable emergency numbers, as well as 2 cen-
tral station numbers and send a digital announcement to
identify the location of the emergency call. The included
LDB-3 control module will supply a contact or switched
12V DC to activate a strobe light. In addition, the E-1600A-
TP2-EWP features a second "Info" button that will dial up
to 3 non-emergency numbers.
Though the strobe requires external power to operate,
8
6
1
8
6
1
• Campus Security Sites
• Area of Refuge sites
• Parking Ramps/Lots
• Automated Tellers (ATM)
• Entryways
• Roadside Emergency Sites
• Stairwells in Public Buildings
Some phone systems do not conform to analog telecom standards and might
not be compatible with the 1600A Series emergency phones. For a detailed
description of the telephone line specifications required for any of the 1600A
Series phones, retrieve Fax Back Document 869.
Phone Power:
voltage, with a minimum loop current of 20mA. Loop current may be
boosted on low current lines with a Viking Model TBB-1 talk battery boost-
er (Fax Back # 630).
LDB-3 Control Module: 120V AC/12V DC 500mA, UL listed
adapter provided
Dimensions: 241mm x 299mm x 51mm (9.5" x11.75" x2")
Shipping Weight:
Mounting: Flush mount to Talk-A-Phone ETP towers, wall
mounts, boxes and pedestals
Environmental: -26°C to 54°C (-15°F to 130°F) with up to 100%
condensing humidity
Material: .125" (11 gauge) brushed stainless steel
Connections: Color-coded wires with gel-filled butt connectors
E-1600A-TP-EWP
E-1600A-TP-EWP
E-1600A-TP2-EWP
E-1600A-TP2-EWP
i
c
e
t
i
c
e
February 29, 2008
Telephone line powered. Minimum 24V DC talk battery
2.9 kg (6.4 lbs)
Advertisement
Table of Contents
Related Manuals for Viking E-1600A-TP-EWP
Summary of Contents for Viking E-1600A-TP-EWP
- Page 1 No batteries are required. The E-1600A-TP-EWP and E-1600A-TP2-EWP are equipped for outdoor or harsh environments with Enhanced Weather Protection, which features: potted circuit boards, sealed trim pots and dip switches, rubber gaskets and boots, gel-filled butt connectors, and extended operating temperature: -15°F to 130°F, tested to -35°F.
- Page 2 Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and the telephone line. It is recom- mended that a surge protector be installed to protect against such surges. Contact Panamax at (800) 472-5555 or Electronic Specialists Inc. at (800) 225-4876. Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666 Rear View of the...
- Page 3 9.50 7.750 EMERGENCY PHONE CALL MODEL E-1600A-TP CONNECTED PUSH FOR HELP VIKING © 2.75 4.00 2.75 With DIP switch To use the Ring Cadence Mode, ring detection MUST be Minimum Cutout "Call Connected" LED Push for "Help" Button ("Info" Button...
-
Page 4: Disable Feature
D. Disable Feature The “Disable” input can be connected to a switch for remotely disabling/turning off the strobe light and the device con- trolled by the auxiliary contacts (camera, etc.). A. Accessing the Programming Mode The 1600A Series emergency phones can be programmed from any Touch Tone phone using a C.O. -
Page 5: Speed Dial Numbers
D. Speed Dial Numbers Up to 20 digits can be stored in each dial position. Special features such as pause, mode change, Touch Tone , and count as single digits. 1. Emergency Speed Dial Numbers The emergency speed dial number programmed in location #00 is the number that is dialed when the “HELP”... - Page 6 Setting B - Call Length Time Out This feature selects the maximum length of time that calls can be connected. Programmable in increments of 1 minute up to a maximum of 9 minutes (Touch Tones 1 - 9). Program 0 in this location to disable the call length time out. With the call length dis- abled, the 1600A series phone must rely on a CPC signal, busy signal, silence or return to dial tone to hang-up.
-
Page 7: Recording The Announcement
Setting C - Repeat Announcement Option The 1600A can be programmed to play the announcement from 1-9 times, or to continuously repeat the announcement every 8 seconds until a Touch Tone is detected from the distant party. The I.D. number (if pro- grammed) will be sent and the call connected LED will turn on automati- cally after the announcement has stopped repeating. - Page 8 K. Central Station Programming The standard 1600A emergency phone is capable of communicating using the “Ademco Contact I.D.”, “Ademco High Speed”, “DTMF 4+1 Express”, or the “DTMF 4+2 Express” formats. All formats use the programming memory location #20 to store the account code and alarm details.
-
Page 9: Standard Operation
b. Ademco High Speed Format This DTMF format consists of a four digit account code, eight zone codes and one alarm type digit. With this format you can identify up to eight different phones by using a zone per phone. A “5” in a zone position means no alarm. -
Page 10: Central Station Operation
"success" log while devices that returned any kind of error are stored in a "failure" log. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.