Connecting A Serial Device - NEC PowerMate SPB-Boston User Manual

Connect the other end of the cable to the printer.
4.
Turn on the printer and the computer.
5.

Connecting a Serial Device

NOTE
system, be sure the serial device is set up correctly.
Follow the setup instructions that came with the
option.
Connect a serial device to the system as follows.
1. Turn off power to the system and to the serial device.
Connect one end of the serial cable to one of the two
2.
serial ports on the rear of the computer.
Secure the cable with the screws provided.
3.
Connect the other end to the serial device.
4.
5-38 Installing Options
Before connecting a serial device to the
Locating the parallel port