Table of Contents
Advertisement
T
Power Management
This feature lets you enable or disable BIOS power
management.
T
Inactivity Timer
The Inactivity Timer lets you set the length of time that
the system needs to be inactive before entering its low-
power or Standby mode. The low-power mode powers
down various devices in the system until you resume
using it. You can select from "1," "5," "10," "20," "30,"
"60," or "120 minutes." A setting of 1 minute achieves
maximum power savings, while a setting of
120 minutes allows maximum performance.
T
Hard Drive
This option controls whether or not a spin down
command is issued to the hard drives when the system
goes into a low-power mode. Your choices are
"Enabled" (default) or "Disabled."
T
VESA Video Power Down
This option controls power to the monitor during the
low-power modes. Your choices are "Disabled,"
"Standby" (default), "Suspend," or "Sleep."
Press the right arrow (cursor) key to move to the Boot
Menu.
System BIOS and Utilities 4-21
Advertisement
Table of Contents
