Setting The Vtm To Use Ssl - NEC Express5800/320Ma User Manual

Setting the VTM to Use SSL

To set up VTMs to enable a standard login
1. Click the SSL tab.
2. Clear the Secured Web Access (SSL) check box.
3. Click Apply.
A check mark next to Secured Web Access (SSL) indicates that secure connections
can be made to the VTM console.
Related Topics
•
"Setting the VTM to Use SSL"
Setting the VTM to Use SSL
Before you set up the Virtual Technician Module (VTM) to enable or require the use of
SSL during VTM console
•
The server certificate is valid.
•
All users have a certificate authority (CA) certificate from the same CA that issues
the VTM server certificate.
!
To set the VTM to enable an SSL connection
1. Click the SSL tab.
2. Request a signed server
3. Upload the signed server certificate
4. To use SSL to encrypt data sent to and from the server during VTM console
sessions, select Secured Web Access (SSL).
5. If you installed a client certificate from your selected CA, and you have a CA
certificate from the same CA on your browser, select Enforce Client Certificate,
in the Certificate Authority Certificate group box, to force administrators of the
Express5800/320Ma system to use this certificate when they connect to the VTM.
6-2 Express5800/320Ma: Virtual Technician Module User's Guide
sessions, ensure that the following conditions have been met:
C A U T I O N
You must complete the above items before selecting the
Secured Web Access (SSL) check box on the SSL page;
otherwise, you cannot log on to the VTM.
certificate.
to the VTM console.