NEC Express5800/320Ma User Manual page 76

POST Codes
C00D
Set latency time between chips in the PCI-to-PCI bus.
C00E
Log Data Queue Strobing (DQS) in memory.
C00F
Initialize CMOS if jumper is set to do so.
C010
Offline POST table end.
C011
Broken POST table end.
C012
Offline Sync POST table end.
C013
Online Sync POST table end.
C014
Offline diagnostic POST table end.
C015
Extended memory POST table end.
C030
Verify that the chipset, fault tolerant switch, and PXH registers are set up correctly.
C031
Initialize the chipset, fault tolerant switch, and PXH registers.
C032
Enable the ROM cache.
C033
Initialize the chipset, fault tolerant switch, and PXH registers again.
C034
Set up the MAC address.
A-14 Express5800/320Ma: Virtual Technician Module User's Guide