Viewing The System Configuration - NEC Express5800/320Ma User Manual

Before you boot the system, make sure that:
•
AC power is being applied to the system.
•
The monitor and any other peripheral devices are turned on.
For more information about operating the system hardware, refer to the operation and
maintenance guide for your system.
To boot the system from the Manage tab
1. On the VTM console, click the Manage tab.
2. In the Front Panel group box, click ftServer Power Button.
To boot the system from the Troubleshoot Server tab
1. On the VTM console, click the Troubleshoot Server tab.
2. Click ftServer Power On.
Related Topics
•
"Powering Off the System from the Manage Tab"
•
"Forcing the System to Power Off"

Viewing the System Configuration

To view the server settings, click the Server Info tab. Server settings are configured at
the host level and cannot be changed in the
The fields on the Server Info page are:
•
Name. Name of the server.
•
IP Address. Server IP address.
•
TimeZone. Time zone in which the server is located.
•
POST Code. Last power-on self-test code (POST) received from the system
controller. For a list of POST codes, see
•
Server State. Current state of the server.
•
System LCD. Current state of the system.
Viewing the System Configuration
VTM console.
Appendix A.
Reviving a System That Is Not Responding 3-7