Powering Off The System From The Manage Tab - NEC Express5800/320Ma User Manual

Powering Off the System from the Manage Tab

You can click ftServer Power Button on the Manage tab of the
up and shut down the Express5800/320Ma system. When the system is booting or
running, a green indicator and the text Server Power is ON are displayed in the
Front Panel group box. Otherwise, Server Power is OFF is displayed, and the
indicator is gray.
Clicking ftServer Power Button works the same way as tapping the button on the front
panel of the system. The system responds in different ways, depending on the current
state of the operating system:
•
If the operating system or the BIOS is starting, stopping, or running, click ftServer
Power Button to shut down the system, preventing the system from starting up.
•
If the operating system hangs or a hardware failure occurs, click ftServer Power
Button to attempt to shut down the system. If the operating system is completely
hung, a graceful shutdown may not be possible, in which case the system controller
attempts a
•
If the operating system is running normally, click ftServer Power Button to shut
down the operating system. You can change the behavior of the button while the
operating system is running in the Shutdown Event Tracker dialog box in
Windows, which is controlled by Group Policy settings. For instructions, see your
Windows documentation.
To turn off the system from the Manage tab
1. On the VTM console, click the Manage tab, and then click ftServer Power Button.
2. On the Confirmation dialog box, click OK.
Related Topics
•
"When the System Is No Longer Responding"
•
"Performing a Non-Maskable Interrupt"
•
"Resetting the Operating System"
•
"Forcing the System to Power Off"
state-sensitive recovery
When the System Is No Longer Responding
(SSR).
Reviving a System That Is Not Responding
VTM console to start
3-5