POST Codes
07
Disable shadow ROM and execute ROMEXEC code from flash memory.
08
Initialize the chipset with initial POST values.
09
Verify CMOS checksum and verify real time clock.
0A
Initialize the CPU registers.
0B
Enable the CPU cache.
0C
Initialize caches with initial POST values.
0E
Initialize the I/O component.
0F
Initialize the local bus IDE.
10
Initialize power management.
11
Load alternate registers with initial POST values.
12
Restore CPU control word during warm boot.
13
Initialize PCI bus mastering devices.
14
Initialize the keyboard controller.
16
Calculate the BIOS ROM check sum.
A-2
Express5800/320Ma: Virtual Technician Module User's Guide