Starting And Ending An Avr Session; Logging On To The Host From An Avr Session - NEC Express5800/320Ma User Manual

Using Advanced Video Redirection

Starting and Ending an AVR Session

If you start an
period of time, or if the Express5800/320Ma system shuts down, the AVR session
ends.
To start an AVR session
1. On the VTM
Redirection.
2. Using the keyboard and mouse, diagnose the system as needed.
3. To exit from the AVR session, click the Close button
Advanced Video Redirection window. Allow several seconds for the window to
close.
Options on the main AVR window allow you to
AVR session.
The Sync Mouse option is not supported at this time.
Related Topics
•

"Logging On to the Host from an AVR Session"

•
"Sending Special Key Sequences in an AVR Session"
•
"Managing AVR Sessions"
Logging On to the Host from an AVR Session
If no one is logged on to the
Redirection
To log on to the host from an AVR session
1. After you
2. On the login window, type your user ID and password, and click Login.
Related Topics
•
"Starting and Ending an AVR Session"
•
"Managing AVR Sessions"
4-2 Express5800/320Ma: Virtual Technician Module User's Guide
Advanced Video Redirection
console, click the Manage tab, and then click Advanced Video
host system
(AVR) session, a message instructs you to log on.
start an AVR session, click Ctrl-Alt-Del at the bottom of the AVR window.
(AVR) session and you are inactive for a
at the top-right of the
send special key sequences
when you start an Advanced Video
during the