Connecting A Configured Local Storage Device To The Host - NEC Express5800/320Ma User Manual

7. Under Select Image/Devicefile from Filesystem, select the file to be mounted on
the host.
8. Under logical type of Image/Devicefile, select the type of media from which the
image file was created. If the image file was created from a CD-ROM, select
CDROM. If the file was created from data on a hard drive, select Blockdevice.
9. Select or clear the following, as applicable, and click OK:
•
To prevent the image file from being changed, click readonly to select it.
•
If the image file is a removable device, click removable to select it.
10. Click OK to return to the Remote Storage Settings dialog box.
11. Connect the device to the
Related Topics
•
"Opening a Configured Device"
•

"Connecting a Configured Local Storage Device to the Host"

Connecting a Configured Local Storage Device to the Host
Use this procedure to connect the configured local devices or images to the
Express5800/320Ma system. Since the connection process connects all the local
devices and images that have been configured, ensure that you configure all the
devices or images at one time before connecting.
To connect the configured remote storage device to the host
1. In the Remote Storage Settings dialog box, select an iSCSI slot that contains a
configured device or image (all configured devices are connected at once,
regardless of the one selected).
2. Click Connect to Host I/F to select it.
N O T E
When the connection established successfully
message is displayed, the search is complete, even
though the progress bar still appears to be searching.
host.
N O T E
To disconnect or change to a different device or image
after connecting, you must
server.
Configuring and Connecting Remote Storage Devices
disconnect the device from the
Using AVR 4-13