Toshiba Strata CTX SoftIPT Technical Bulletin page 4

Step 1: Install SoftIPT
11. In the Softphone Setting window (shown on page 2 of this bulletin), enter the following:
• SoftIPT extension
• Outgoing Prefix (outside line access code, if required)
• Long Distance prefix
• IP address of BIPU-MXX (xx = version number). See your System Administrator for this address
• If there are multiple network adapters, select the one for SoftIPT.
Changing button labels "Line 1" ~ "Line 6" is optional See
Note
12. Click OK. If requested to enter an integer, make sure you have entered a phone extension or area
code.From the SoftIPT main screen, click the "X" in the upper right corner (exits the SoftIPT
application).
13. Double click on the SoftIPT icon to restart the SoftIPT.
14. Plug in your headset. The next two steps are guides to adjusting the microphone/headset volume.
15. Select Start > Control Panel > Sounds and Audio Devices.
16. On the Voice tab, click Volume. Adjust the Microphone volume. Click Advanced. Make sure all check
boxes are off and set MIC volume to 90% high. Select OK. The SoftIPT is ready to use.
Upgrading the SoftIPT
1. Close the SoftIPT application if you are using it.
2. Insert Strata CTX CD-ROM into your CD-ROM drive.
3. Double click on SoftIPT-PCInstaller.exe. The SoftIPT - InstallShield Wizard runs. You will be
prompted to select upgrade, repair or remove the program.
4. Click Upgrade or Repair.
5. Click Finish to exit the Wizard. Your SoftIPT is upgraded.
4 of 12
"Labeling Feature Buttons"
Installing and Operating the SoftIPT
for details.