Related Manuals for Tippmann CUSTOM PRO
Summary of Contents for Tippmann CUSTOM PRO
- Page 1 TIPPMANN CUSTOM PRO CUSTOM PRO RESPONSE CUSTOM PRO WITH E-TRIGGER Owner’s Manual Le Manuel du Propriétaire Manual del Usuario TP04500 Date 06/05...
- Page 2 WARNING THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION WHEN USING THIS PRODUCT.
- Page 3 WARNING SAFETY IS YOUR RESPONSIBILITY READ, FAMILIARIZE YOURSELF AND ANY OTHER USER OF THIS MARKER WITH THE ALWAYS KEEP SAFETY INSTRUCTIONS ALWAYS KEEP BARREL SLEEVE IN THIS MANUAL. TRIGGER SAFETY INSTALLED WHEN FOLLOW THESE IN SAFE MODE NOT IN SHOOTING INSTRUCTIONS WHEN UNLESS FIRING SITUATION AS...
-
Page 4: Warning/Caution
WARNING THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION WHEN USING THIS PRODUCT. -
Page 5: Table Of Contents
2955 Adams Center Road, Fort Wayne, IN 46803 USA P) 260-749-6022 • F) 260-749-6619 www.tippmann.com CONGRATULATIONS on your purchase of your Tippmann paintball marker. We believe our CUSTOM PRO line of markers be the most accurate and durable paintball markers available, and proudly manufactured in the USA. All... -
Page 6: Warning/Liability Statement
If you as a user do not accept liability, Tippmann Sports, LLC requests you do not use a Tippmann Sports, LLC marker. By using this paintball marker you release Tippmann Sports, LLC of any and all liability associated with its use. - Page 7 Safety Is Your Responsibility (continued from page 4) assure the safety of not only yourself but everyone around you. The user should at all times use caution when using this marker. The sport of Paintball will be viewed and judged upon your safe and sportsmanlike conduct.
-
Page 8: Getting Started
(see instructions on page 7). Getting Started STEP 1) Prepare Marker for Air Supply Cylinder Installation • For Model: Custom Pro With E-GRIP - You must first install battery (see instructions on page 9 before performing STEP 2. -
Page 9: Hopper
Trigger Rate of Fire instructions on page 8 then go to STEP 5. • For E-TRIGGER marker - complete E-GRIP Tuning and Operating Instructions on page 9. • For CUSTOM PRO marker - Go to STEP 5. STEP 5) Velocity Adjustment Each time you play paintball,... - Page 10 / assembly instructions on page 15. If a problem still exists, call Tippmann Service Department at 1-800-533-4831. NOTE: To disable the Response...
- Page 11 E-TRIGGER Battery Installation or Replacement Before installing air supply, install 9 volt battery (not included). STEP 1: Prepare the marker for disassembly. To do so, first follow the unloading and air supply removal instructions on page 14 and never disassemble a marker that is under pressure.
- Page 12 (follow instructions on page 11). If a problem still exists, call Tippmann Service Department at 1-800-533-4831. E-TRIGGER...
- Page 13 E-TRIGGER Troubleshooting (continued from page 10) E-TRIGGER Internal Parts Positioned for Reassembly Do not operate sear tripper assembly uninstalled as solenoid/armature may pinch you. 1) Place solenoid / armature into position in right receiver. Insert Magnet in slot below armature as shown. 2) Carefully align and insert computer board into slot.
-
Page 14: Schematic
CUSTOM PRO Custom Pro Response Parts (page 17) Custom Pro with E-Trigger Parts (page 17) Basic Parts List... - Page 15 WARNING DO NOT FIELD STRIP OR OTHERWISE DISASSEMBLE THIS MARKER WHILE IT IS PRESSURIZED WITH AIR. TIPPMANN 1-800-533-4831 www.tippmann.com...
-
Page 16: Unloading Your Marker
• To clean your paintball marker use a damp towel with water to wipe off paint, oil, and debris. We recommend using Tippmann marker oil or other premium gun oil to maintain your marker in good working condition. Re-oil with a few drops to the front bolt o-ring and rear bolt. -
Page 17: Marker Disassembly
Cleaning and Maintenance (continued from page 14) recommend using Tippmann marker oil or other premium gun oil on the barrel o-ring and air supply valve o-ring. • To clean the barrel. Depress front sight and tip out feed elbow. Insert metal tab of cable squeegee into breach, then pull squeegee through barrel to remove debris. -
Page 18: Repairing Air Supply Leaks
These may be purchased from Tippmann or your local paintball dealer. NOTE: If new valve o-ring does not resolve air supply leak, do not attempt to repair air supply cylinder. Contact Tippmann Sports, LLC or your local paintball dealer. Storage Before storage unload and remove air supply (see page 14). -
Page 19: Specifications
Weight (without tank) ........... 3.05 lbs. Model Specific..Tippmann CUSTOM PRO E-TRIGGER WITH Cycle Rate ..........17 shots per second Weight (without tank) ........... 3.19 lbs. Model Specific Parts Not Shown on CUSTOM PRO schematic. CUSTOM PRO RESPONSE CUSTOM PRO WITH E-TRIGGER TA01135... -
Page 20: Warranty And Repair Policy
WARRANTY AND REPAIR POLICY Tippmann Sports, LLC warrants that this product is found free from defects in materials and workmanship for a period of 1 year from the original date of purchase by the initial owner/ purchaser. This warranty does not apply to defects discovered after purchase which were caused by the unauthorized modifications and alterations of our product. - Page 23 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 24 CUSTOM TIPPMANN CUSTOM CUSTOM IPRO CAMOUFLAGE MARKERS Owner’s Manual Le Manuel du Propriétaire CUSTOM Manual del Usuario RESPONSE CUSTOM WITH E-TRIGGER...