Notes For Windows Users; Notes For Macintosh Users - TerraTec PHASE 28 Manual

24 bit/192 khz multi i/o recording interface

Hide thumbs Also See for PHASE 28:

Table of Contents

Notes for Windows users:

■

The drivers have not been certified by Microsoft. You will receive a warning to this

effect in Windows 2000 and XP, which you can safely ignore. You can continue the

installation without concern.

■

After installing the drivers, open the Device Manager and check for yellow exclamation

marks. If you find any, you can usually solve the problem by repeating the installation

according to the instructions. Also refer to the FAQs (frequently asked questions)

provided on the product CD for other suggested solutions.

■

After the drivers have been installed, install the software. You can start the installation

using the autostart function of the CD, for example. The PHASE 28 ControlPanel has

to be installed in all circumstances. Full functionality is not provided using the stan-

dard Windows Mixer.

■

The WDM audio drivers can be selected in the applications as usual. ASIO drivers are

available in compatible programs; WDM kernel streaming is "not visible" (in other

words, it is always available for applications needing it and cannot be selected manu-

ally). The respective buffer sizes are configured in the PHASE ControlPanel (not the

Windows ControlPanel).

■

The PHASE 28 system is shipped with driver support for MAC OS 10 (OS X). In the

OS10 version, we recommend the Apple operating system update called "Jaguar"

(current version 10.2.6). A version update, which can be obtained for an extra charge,

contains some improvements specially geared towards audio applications.

■

The audio and MIDI connection using OS10(X) is built exclusively on the OS10 core

audio/MIDI concept.

PHASE 28 (English)

Table of Contents