Driver Installation Under Windows Me; Installation Under Windows 2000 - TerraTec PHASE 28 Manual

Driver installation under Windows Me.

1. Boot your computer after installing the PHASE 28 PCI card.
2. During the boot, the Windows hardware wizard will identify the new hardware as a
"PCI Multimedia Audio Device". Select here "Specify the location of the driver (Ad-
vanced)" and confirm with "Next".
3. Now activate the "Specify a location:" checkbox and enter the path <CD>:\PHASE
28\Driver\Windows\. Confirm by clicking "Next". Alternatively, you can change to
the respective directory by clicking on "Browse...".
4. The hardware wizard will now search for the AudioSystem PHASE 28 driver and will
display the location of the driver. Confirm by clicking "Next".
5. In the final window, the hardware wizard will report that the driver software has been
installed successfully. Close the wizard by clicking "Finish".
After successful driver installation, the PHASE 28 ControlPanel can be installed easily
using the autorun option (<CD>:\autorun.exe).
Follow the instructions on the screen to install the various bundled software programs.
The ControlPanel application can also easily be removed from your system. To do so,
access "Add/Remove Programs" from the Control Panel and search for the program to be
deleted, select it and click "Change/Remove".
After a successful driver installation, you should verify the correct condition of your
Windows ME system. The Device Manager presents an overview of installed and
recognized hardware components of your computer. The Device Manager can be found
on the Control Panel under "System" > "Hardware". Then click the "Device Manager"
button.

Installation under Windows 2000.

1. Boot your computer after installing the PHASE 28 PCI card.
2. During the boot, the Windows hardware wizard will identify the new hardware as a
"Multimedia Audio Controller". Confirm by clicking "Next".
3. Mark the "Search for a suitable driver for my device (recommended)" checkbox and
insert the PHASE CD if you have not done so already. Click "Next".
4. The hardware wizard will now inform you that it will search for drivers for a "Multimedia
Audio Controller". Activate the checkbox "CD-ROM drives" and confirm with "Next".
5. The hardware wizard will now indicate that it has found a suitable driver for the
"Multimedia Audio Controller" on the CD-ROM (<CD>:\driver\). Click "Next" to
start the installation.
6. The following dialog box may appear at this point or later in the installation:
12 PHASE 28 (English)